Wissensdatenbank

Support > Wissensdatenbank > Ascend Servers > Linux Support > How do i Bind my Additional IPs?

How do i Bind my Additional IPs?

These instructions are for CentOS / Fedora specifically.

 

By default, Citadel Servers only binds your first primary IP address. This is because there are different methods of applying your additional IPs that may require that they not be bound originally.

Below we show two methods of binding IP addresses to your server.

 

Method one: Editing the eth adaptor file

 

By default the main ip (Primary eth adaptor) for your server is stored in:

 

/etc/sysconfig/network-scripts/ifcfg-eth0

 

To add additional IPs to your server you need to increment the end of this file from eth0 to eth1 per addtional eth adaptor. Here are some examples:

Your primary IP\First IP would remain as:

/etc/sysconfig/network-scripts/ifcfg-eth0

So your Secondary\1st additional IP set would be:

/etc/sysconfig/network-scripts/ifcfg-eth0:0

So your 4rd IP set would be:

/etc/sysconfig/network-scripts/ifcfg-eth0:3

 
This will allow you to add a an additional IP address to your server. In this example we will add a 2nd additional IP to the server.

In this example we will use the default linux editor, VI.

This will copy the file ending with eth0 to a new file ending with (eth0:1)

 

cp /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth0:1

 

We will now open the newly created file with the VI text editor:

 

vi /etc/sysconfig/network-scripts/ifcfg-eth0:1

 

You should see the text below. Edit your IP address, netmask and gateway and increment the Device field to match file name (eth0:1 in this example)

Press the insert button on your keyboard to type.

DEVICE="eth0:1"

BOOTPROTO="static"

IPADDR="IP.FAIL.OVER"

NETMASK="255.255.255.255"

ONBOOT="yes"

BROADCAST="IP.FAIL.OVER"

DNS1=192.99.37.204

DNS2=192.99.37.205

 

 

Press Esc then type :wq

Restart the network service


/etc/init.d/network restart



type ifconfig to make sure it is all set correctly.

You should now be able to ping the outside world


ping citadelservers.com

Method two: Using Grep

 

Find out which interface is your public

This shows that my public interface (does not have a “10.” address) is eth1.

 

2) Create the route file

Before running the command below, change “eth1” to your public interface from step 1 and set your START and END IP addresses in the range.

Note:Your IPADDR_START should be your second usable IP as your primary is already bound. The IPADDR_END value is your last usable IP. If you are unsure what these values are please check your welcome e-mail or open a support ticket.

3) Restart your network interface

 

 

War diese Antwort hilfreich?
0 Benutzer fanden dies hilfreich 0 Stimmen

Lesen Sie auch